Description
| Function display | “DC OK” (LED green) (U(o) 17.6…19.4V) |
|---|---|
| two-Phase use | 85…264V AC A fuse or a protective Switch must be connected to the N-terminal |
| temperature coefficient | ±0.05%/K |
| ripple and noise | < 0.23 V |
| hold time 115V AC | > 40 ms |
| hold time 230V AC | > 40 ms |
| isolating voltage Output DC | 4242 V |
| cohesive resistance (In-/Output) | 100 MOhm |
| Derating | A. 60 °C … 70 °C: 2.5 %/K B. 30 °C … 70 °C: 1.75 %/K |
| cooling | free convection |
| MTBF | 230.000h |
| Connector cross section (input | 0.5-6mm²/0.5-4mm² (AWG20-10/AWG20-12) |
| Connector cross section (output) | 2,5-6mm²/2,5-4mm² (AWG14-10/AWG14-12) |
| Wire strip length | 8 mm |
| Permissible torque min. | 0.5 Nm |
| Permissible torque max. | 0.6 Nm |
| Control “Adj” | trimming potentiometer for fine-tuning of U(out) |
| Number of + | 2 |
| Number of – | 3 |
| Further terminals | L1, N, PE |
